B-24J LIBERATOR CONSOLIDATED
Built by Consolidated, the B-24J was a later version of the heavy-bomber B-24 Liberator. B-24J featured an improved autopilot and a bombsight.

Scale: 1/60
Wing Span: 22" Length: 13 1/4"

X-5 BELL
The X-5 was the world's first airplane to vary the sweepback of its wings in flight. It was built to prove the theory that by increasing the sweepback of an airplane's wings after takeoff.

Scale: 1/32
Wing Span: 7 3/4" Length: 12 3/4"

X-2 STARBUSTER
The Bell X-2 Starbuster was an American research aircraft built to investigate flight characteristics in the Mach 2-3 range.

Scale: 1/32
Wing Span: 13" Length: 16 1/4"

X-4 BANTAM NORTHROP
The No. 1 aircraft was first flown by Northrop on December 16, 1948, and the second X-4 made its initial flight on June 7, 1949.

Scale: 1/32
Wing Span: 10 1/4" Length: 9 3/4"

X-32 JSF BOEING
STOVL fighter to replace their Sea Harriers. The two services collaborated on STOVL research in the late 1980s, with control of this effort finally picked up by the US Defense Advanced Research Projects Agency (DARPA) in 1989.

Scale: 1/48
Wing Span: 8 1/2" Length: 12 3/4"

C-38A COURIER GALAXY AEROSPACE
The transcontinental C-38A is a special mission Gulfstream 100. The C-38A flies farther, faster and more efficiently than any other priced business jet aircraft and provides the necessary communications technology.

Scale: 1/48
Wing Span: 13 7/8" Length: 14 1/8"

SBD-5 DAUNTLESS DOUGLAS
The Douglas SBD Dauntless, nicknamed "Barge", "Clunk" or "Slow but Deadly." was the standard carrier-borne dive-bomber of the US Navy from mid-1940 until November 1943, when the Curtiss Helldiver replaced it.

Scale: 1/32
Wing Span: 15 1/2" Length: 12 1/2"

V-22 OSPREY BOEING/BELL
The world’s first production tiltrotor aircraft, the V-22 Osprey is a joint service, multi-mission aircraft which can operate like a helicopter because of its vertical take-off and landing capability (VTOL).

Scale: 1/96
Wing Span: 6 1/2" Length: 7 1/4"

T-6A TEXAN II RAYTHEON-BEECH
Built by Raytheon, the T-6A Texan II is a turboprop aircraft of World War II used by the U.S. Air Force and U. S. Navy for their basic pilot training.

Scale: 1/32
Wing Span: 12 3/8" Length: 12"

X-36 TEST A/C BOEING
The McDonnell Douglas X-36 Tailless Fighter Agility Research Aircraft was a subscale prototype jet designed to fly without the traditional tail surfaces common on most aircraft.

Scale: 1/15
Wing Span: 8 3/4" Length: 13 3/8"

X-33 VENTURE STAR LOCKHEED-MARTIN
The X-33 was a technology demonstrator for NASA's "next-generation" of space launch vehicle named Venture Star.

Scale: 1/50
Wing Span: 18 1/4" Length: 16 5/8"

D-558-1 SKYSTREAK DOUGLAS
The Douglas Skystreak (the D-558-1) was designed in 1945 by the Douglas Aircraft Company for the U.S. Navy Bureau of Aeronautics, in conjunction with the National Advisory Committee for Aeronautics (NACA).

Scale: 1/32
Wing Span: 9 1/2" Length: 13 1/4"

XF-92A CONVAIR
First flown on September 18, 1948 at Edwards AFB, California. Only one XF-92A was built; it was delivered to the Museum in 1969 from the University of the South, Sewanee, Tennessee.

Scale: 1/32
Wing Span: 12" Length: 18"

FW-190A FOCKE-WULF
The Focke-Wulf Fw 190 was a single-seater, single-engine fighter aircraft of the Luftwaffe. Used extensively during WW II from 1941 over 20,000 were manufactured including around 6,000 fighter-bomber models.

Scale: 1/32
Wing Span: 12 3/4" Length: 11"

JU-88A-1 JUNKERS
The Junkers Ju 88 was a WW2 Luftwaffe twin-engine multi-role aircraft. Among the most versatile planes of the war, it was used as a bomber, close-support aircraft, nightfighter, torpedo bomber and reconnaissance aircraft.The Ju-88A-1 series was first used in anti-shipping action close to Norway.

Scale: 1/36
Wing Span: 21 7/8" Length: 15 5/8"

TORNADO RAF PANAVIA
The Panavia Tornado is a jet engine fighter-bomber jointly developed as the Multi-role combat aircraft - or MRCA - by Italy, Germany and the United Kingdom.

Scale: 1/40
Wing Span: 12 1/8" Length: 14 7/8"

F-4U-7 CORSAIR CHANCE-VOUGHT
The F4U-7 was developed for France. It was based on the F4U-4B. The cockpit was again slightly redesigned, with a small upward extension of the rear fuselage decking. Thus the pilot could be seated even higher.

Scale: 1/32
Wing Span: 16 1/4" Length: 12 1/4"

B-777-200 CONTINENTAL BOEING
The basic 777-200 as launched in October 1990 was offered in two versions. The 777 were originally conceived as a stretched 767, but Boeing instead adopted an all-new design.

Scale: 1/200
Wing Span: 12" Length: 13"

B737-800 AA Astrojet BOEING
The Boeing 737 is a popular short-to-medium range commercial passenger jet aircraft. It has been continuously manufactured by Boeing Commercial Airplanes since 1967.

Scale: 1/100
Wing Span: 13 3/4" Length: 15 1/4"

B757-200 AA/TWA BOEING
The first 757-200 rolled out of the Boeing Renton, Washington plant January 13, 1982 and made its first flight on February 19, 1982.

Scale: 1/100
Wing Span: 15" Length: 19"

RAYTHEON-BEECH STARSHIP
Despite its extensive use of modern technologies and innovative design the Starship was a commercial failure.

Scale: 1/48
Wing Span: 14 1/4" Length: 12"

DOUGLAS WORLD CRUISER
Built for the sole purpose of attempting the first circumnavigation of the globe by air, the single-engine Douglas World Cruiser laid the foundation for intercontinental flight and earned for Douglas the motto “First Around The World”.

Scale: 1/32
Wing Span: 19 1/8" Length: 14 3/4"

NORTHROP " ALPHA"
The Northrop Alpha represents a notable point of transition in modern airline design, for it combined features of the past and of the future in a very utilitarian package.

Scale: 1/24
Wing Span: 22" Length: 14"

DGA6 MR. MULLIGAN - RACING PLANE
The sole DGA-6 was constructed in 1934 by Gordon Israel and Benjamin Howard. It featured a steel tube fuselage with a plywood skinned wing.

Scale: 1/ 20
Wing Span: 19 7/8" Length: 15 3/8"

T-3A FIREFLY SLINGSBY
The T-3A is the newest version of the Slingsby Aviation T-67’s Firefly line of military training aircraft. The prototype began flying in the summer of 1991, and the Air Force accepted the delivery in February 1994.

Scale: 1/24
Wing Span: 17 3/4" Length: 11 3/4"

RH-53 (CH-53)
Navy and Marine CH-53s were first known as Sea Stallions. First flown in 1964, the Sea Stallion was developed for the U.S. Marine Corps. It was designed to carry a 105mm howitzer or 38 combat-equipped troops.

Scale: 1/48
RS:19.50" Length: 18.25 "

BOEING X-37
The Boeing X-37 is a demonstration spaceplane that is intended to test future launch technologies while in orbit and during atmospheric reentry.

Scale: 1/50
Wing Span: 7 1/8" Length: 13 3/8"

B-200 SUPER KING AIR
Built by Beechcraft (now Raytheon), the Super King Air 200 is the T-tailed version of the King Air series, which has a greatly improved performance over previous models.

Scale: 1/48
Wing Span: 14 1/8" Length: 11 1/4"

Cessna Citation Jet
The original Citation I was one of the first light corporate jets to be powered by turbofan engines. While the Learjet’s of the 1960's were intimidating to some for their speed and initial accident rates, the Citation was the first aircraft to aggressively target a segment of pilots who could upgrade from slower propeller-driven aircraft.

Scale: 1/40
Wing Span: 12.25" Length: 13.5"

Cessna Citation III
The all-new Cessna Model 650 Citation III was designed as a high performance, mid size long-range corporate jet to supplement the much smaller Citation I and II. Development of this very different Citation began in 1978. As it evolved, the III had little in common with the previous Citation models other than the name.

Scale: 1/40
Wing Span: 16" Length: 15.5"

LM Orbital Space Plane
The Orbital Space Plane was one of three parts making up NASA's Integrated Space Transportation Plan (ISTP). The plan made investments to extend Shuttle's operational life for continued safe operations.

Scale: 1/60
Wing Span: 5.75 " Length: 11 "

Cessna Citation V
The Citation V, Citation Ultra and Ultra Encore are the largest straight wing members of Cessna's highly successful Citation family.

Scale: 1/40
Wins Span: 14" Length: 15.5"